02. SEPARATOR WITH AUTOMATIC LIGHT FLUIDS SEPARATION
EKOguard SEPOIL 1
Basic measures range:
|
V - SEPARATOR VOLUME
|
800 – 50000 (L)
|
|
Q - SEPARATOR CAPACITY, FLOW
|
1,5 – 250 (L/s)
|
Efficiency:
- Water quality on the separator exit, with provided input parameters, is that mineral oils quantity in the water is less than 5 mg per liter.
Work principle:
- Sand and mud separation is conducted in the first chamber. After passing through oil separation chamber and through coalescent filter, purified water runs through the separator output connector.
02. SEPARATOR WITH AUTOMATIC LIGHT FLUID SEPARATION
EKOguard SEPOIL 3
Basic measures range:
|
Q - SEPARATOR CAPACITY, FLOW
|
1,5 – 100 (L/s)
|
Efficiency:
- Water quality on the separator exit, with provided input parameters, is that mineral oils quantity in the water is less than 0,01 mg per liter, which is 500 times better efficiency than with "ordinary" separators with coalescent filters (5 mg per liter)
- This separator separates even emulsion oils
Work principle:
- Solids sedimentation is conducted in the first chamber. After passing through oil separation chamber purified water runs through the separator output connector.
- This type of separator is equipped with automatic light fluids separation equipment. When the light fluids level probe is actived during the separator work, special pump used to dispose them into special container is turned on.
